|
|
|
|
|
 Pinball links:
www.flipperwinkel.nl
|
|
To help me preventing repairs with 'no thank you', I ask a standard 15 euro (*) compensation for my time and efforts to help you to repair your pinball by email. You need some skill of electronics, measuring devices and repair tools *) The fee is based on fair use. If needed I can repair your boards at my place. You pay for used parts (*) and postage back. If I succeed in repairing your boards, the fee is 50 euro per board. *) Thus parts I bough and keep, are not charged. Repairing a cabinet is done (if possible) on site (with travel expenses) or (preferred) at my place, were you deliver and collect the machine / parts. -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- If you have any trouble with repairing your Atari-pinball, don't hesitate to drop me a mail and I will try to help you (by mail). If I can help you, maybe you can help me increasing my collection :-) The first Atari pinball machine I bought, was a Space Riders (for cheap) But it was not working. After many sleepless nights and many PCB-repairs (14 chips replaced!) I finally found the fault!! The second was a Superman. Again
non-working. This one I also managed to repair Then I repaired a Time
2000, The main PCB (playfield) I could get to work,
but the aux-board seemed to be a larger problem. By now I have
repaired 3 more space-riders PCB's
|
|
